Skip to content
Irrigation lines and valve box on a Northern Nevada property

How an irrigation blow-out actually works

Irrigation 3 min read

Why a pancake compressor won't do it, why high pressure makes it worse, and what a proper winterization looks like. The cheapest repair is the one you avoid.

Water expands about 9% when it freezes. A sealed pipe with water in it has nowhere to put that, so something splits — usually a lateral, a valve body, or the backflow assembly, which is the most expensive part of the system.

All of it is below grade. You find out in April, and by then you’re paying for excavation as well as parts.

#Volume clears lines. Pressure just breaks things.

This is the thing most people get backwards.

Blowing out a system is about moving a large volume of air slowly, pushing the water ahead of it out through the heads. It is not about blasting the line.

  • CFM (volume) is what does the work. You want serious airflow.
  • PSI (pressure) needs to stay low — typically under 50 PSI for most residential systems, lower for drip.

A small pancake compressor from the garage has plenty of pressure and almost no volume. It’ll build pressure against the closed system, pop the pressure-relief, and clear almost nothing. Meanwhile that pressure is being applied to seals, gaskets and poly fittings that were never designed for compressed air.

#The order it’s done in

  1. Shut off the water supply to the system at the main.
  2. Connect at the correct point — usually a blow-out port downstream of the backflow, not upstream of it.
  3. Open one zone at a time, starting with the furthest from the compressor.
  4. Short bursts. Air on, watch the heads mist then run dry, air off. Move to the next zone.
  5. Come back round a second time. Water settles out of the line walls; a second pass gets what the first left.
  6. Drain and protect the backflow — this is the expensive component and it usually needs its test cocks opened.
  7. Leave a valve open so any residual water has somewhere to expand.

Drip zones need special care: low pressure, and emitters clog easily if debris gets pushed through.

#When to do it

Before the first hard freeze, not after. A blow-out done in December on a system that already froze in November doesn’t undo the damage — it just tells you where the split is.

In the Carson Valley that means mid-October to early November most years. Watch the forecast rather than the calendar; if a run of nights below about 28°F is coming, get it done first.

#What it saves you

A blow-out is one of the cheapest services on the list. A cracked backflow assembly plus the excavation to reach it is a different order of magnitude, and a split mainline can run all spring before anyone notices.

It’s the definition of maintenance that pays for itself.


We winterize systems across Gardnerville, Minden, Carson City and Reno with the right equipment for it. The October and early-November slots go fast — get on the list.

  • irrigation
  • winterization
  • fall
  • maintenance
Share
Call now Free estimate